Aluminum/Copper Conductor XLPE/PVC Insulated Power Cable--

Product Description

Construction:

Conductor: Solid or stranded copper
Insulation: Cross-linked polyethylene (XLPE) or Polyvinyl chloride (PVC)
Filler: Polypropylene filament with lapped binding tape
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC) for armoured cable.
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA) (for armoured cable)
Sheath: Polyvinyl chloride (PVC)

Application:

1)These cables are most suitable for direct burial or for installation on trays or ducts, Where there is
a risk of mechanical damage, armoured cables should be used.

2) For laying in ground along route with large difference of level able to bear external mechanical forces.

Cores and sections

1core, 2cores, 3cores, 3C+1C, 3C+2C, 3C+3C, 4C, 4C+1C, 4C+2C, 5C

Construction types:

CU/PVC/PVC/STA/PVC, CU/PVC/PVC/SWA/PVC, CU/XLPE/PVC/STA/PVC,CU/XLPE/PVC/SWA/PVC;

AL/PVC/PVC/STA/PVC, AL/PVC/PVC/SWA/PVC, AL/XLPE/PVC/STA/PVC, AL/XLPE/PVC/SWA/PVC;

Nominal Section:

1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2

Operating Features:

The maximum conductor operating temperature: 90°C
During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C
Environment temperature should be no lower than 0°C for laying the cable.

Features:

XLPE insulated power cable do not has excellent electric, mechanical properties,but also has powerful resistance against chemical corrosion,heat resistance and enviromental stress resistance. Its structure is simple. The long period operating temperature is +90 °C. It is conveninet to use and can be laid with no restriction of different level.

Standards:

GB/T, IEC60502, BS6346, JB/T, NFC, VDE, AS/NZS, AWG, UL

Rated Voltage(kv):

0.6/1kv, 1.8/3kv, 3.6/6kv, 6/10kv, 8.7/15kv, 12/20kv, 18/30kv, 21/35kv
1/1kv, 3/3kv, 6/6kv, 8.7/10kv, 12/15kv, 18/20kv, 26/35kv